System MPL | Exterior Facade Access Panel | Removable


  • Removable
  • Non-Rated
  • Hardie Board
  • For Exterior Facades
  • Air Tight & Dust Resistant


The access panel consists of aluminum profiles, a Hardie Board insert and a round cylinder lock with key. Both, an outer and an inner frame of the access panel consist of four single frames, which are firmly connected due to a special welding process.

The access panel is equipped with a safety-system against accidental opening. In order to avoid accidents, this safety-system has to be secured after each opening. A joint gap of ⅛” (3 mm) is visible between outer frame and door leaf, which is equipped with an innovative brush joint (air-tight and dust- resistant water) and, in addition, with a special joint (resistant). Access panels for facades in the outer area are applicable for direct mounting into solid walls (without external wall insulation system) or for installation into a wall insulation system (foam- sealed)

Additional information

Product Sizes

8" X 8" (203mm X 203mm), 12" X 12" (305mm X 305mm), 16" X 16" (406mm X 406mm), 20" X 20" (508mm X 508mm), 24" X 24" (610mm X 610mm), Custom Size

Lock Options

None, Z – Round Cylinder Lock with Key, FS – Screwdriver Operated 4-Square Cam Latch, H1 – Hex Head Cam Latch, H2 – Small Hex Head Cam Latch, M – Mortise Cylinder Lock Preparation, P1 – Pinned Hex Head Cam Latch, P2 – Small Pinned Hex Head Cam Latch, SD1 – Screwdriver Operated Cam Latch, SD2 – Small Screwdriver Operated Cam Latch, SN – Touch Latches (Standard)


There are no reviews yet.

Be the first to review “System MPL | Exterior Facade Access Panel | Removable”

Your email address will not be published. Required fields are marked *