System MW – Masonry Access Panel | Removable

Features:

  • Removable
  • Non-Rated
  • Drywall Inlay of either ½” or ⅝”
  • For Solid Walls

Description

The access panel consists of a welded aluminum frame and is available with 1/2″ (12.7 mm) or 5/8″ (15.9 mm) inlayed drywall and two latches. Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process. For sizes 12” x 12” (305 x 305 mm) and up the access panels are equipped with a safety system to prevent accidental opening. This safety system must be reattached if the hatch is removed.
The reveal of 1/16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. This access panel is designed to be recessed into concrete wall systems. This panel comes with predrilled holes for easy installation.

Custom sizes:

These are custom sizes, manufactured exactly according to customer specifications.

Additional information

Drywall Thickness

1/2" (12.7mm), 5/8" (15.9mm)

Product Sizes

8" X 8" (203mm X 203mm), 12" X 12" (305mm X 305mm), 16" X 16" (406mm X 406mm), 18" X 18" (457mm X 457mm), 20" X 20" (508mm X 508mm), 24" X 24" (610mm X 610mm), Custom Size

Lock Options

Z – Round Cylinder Lock with Key, FS – Screwdriver Operated 4-Square Cam Latch, H1 – Hex Head Cam Latch, H2 – Small Hex Head Cam Latch, M – Mortise Cylinder Lock Preparation, P1 – Pinned Hex Head Cam Latch, P2 – Small Pinned Hex Head Cam Latch, SD1 – Screwdriver Operated Cam Latch, SD2 – Small Screwdriver Operated Cam Latch, SN – Touch Latches (Standard)

Reviews

There are no reviews yet.

Be the first to review “System MW – Masonry Access Panel | Removable”

Your email address will not be published. Required fields are marked *