System MPLV | Plaster Exterior Facade Access Panel | Removable

  • Removable
  • Non-Rated
  • Hardie Board
  • For Exterior Facades
  • Air Tight & Dust Resistant
Clear
Loading...

Description

The access panel consists of aluminum profiles, a Hardie Board insert and a round cylinder lock with key. Both, an outer and an inner frame of the access panel consist of four single frames, which are firmly connected due to a special welding process.

The access panel is equipped with a safety-system against accidental opening. In order to avoid accidents, this safety-system has to be secured after each opening. A joint gap of ⅛” (3 mm) is visible between outer frame and door leaf, which is equipped with an innovative brush joint (air-tight and dust- resistant water) and, in addition, with a special joint (resistant). Access panels for facades in the outer area are applicable for direct mounting into solid walls (without external wall insulation system) or for installation into a wall insulation system (foam- sealed)

Access Panel Design

Removable
Air Tight & Dust Resistant
Ready-To-Paint Access Door for sizes 24″ and smaller

Fire protection

Non-Rated

Usage

Plaster Exterior Facade

Model

System MPL

Need additional help? Below you will find installation instructions and installation videos

Product Information:
Advantages of using panels designed by FF Systems Inc.
Looking for measurements to plan for your project? See below for what you need.
illu_mp_2

Standard Dimensions with Hardie Board Inlay

System MPLV
A(in)
A(mm)
B(in)
B(mm)
MPLV203203
8
203
8
203
MPLV305305
12
305
12
305
MPLV406406
16
406
16
406
MPLV508508
20
508
20
508
MPLV610610
24
610
24
610