System F2DF – Drywall Bead Flange Access Panel | Removable | Drywall Inlay | Touch Latches


  • Wall Use Only
  • Removable
  • Non-Rated
  • Drywall Bead Flange
  • Drywall Inlay of either 1/2” or 5/8”
  • Ready-To-Paint Access Door for sizes under 24″
  • Ceiling Version Available


The access panel consists of a welded aluminum frame and is available with a 5/8″ (15.9 mm) drywall inlay and two latches. Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process.

For sizes 12” x 12” (305 mm x 305 mm) and up the access panels are equipped with a safety-system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1/16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side.

For this panel since it installs from the front of the drywall inlay size does not matter.

Additional information

Use Type

Ceiling, Wall

Drywall Thickness

1/2" (12.7mm), 5/8" (15.9mm)

Product Sizes

10" X 10" (254mm X 254mm), 14" X 14" (354mm X 354mm), 8" X 8" (203mm X 203mm), 12" X 12" (305mm X 305mm), 16" X 16" (406mm X 406mm), 18" X 18" (457mm X 457mm), 20" X 20" (508mm X 508mm), 24" X 24" (610mm X 610mm), Custom Size

Lock Options

Z – Round Cylinder Lock with Key, FS – Screwdriver Operated 4-Square Cam Latch, H1 – Hex Head Cam Latch, M – Mortise Cylinder Lock Preparation, P1 – Pinned Hex Head Cam Latch, SD1 – Screwdriver Operated Cam Latch, SN – Touch Latches (Standard)


There are no reviews yet.

Be the first to review “System F2DF – Drywall Bead Flange Access Panel | Removable | Drywall Inlay | Touch Latches”

Your email address will not be published. Required fields are marked *