1050 Series | Heavy-Duty Floor Access Covers

Description

The class-leading 1050 Series Heavy-Duty Floor Access Covers are suitable for all use with thicker and hard-wearing floor finishes to enable permanent, safe access to services concealed underneath.

The 1050 Series is available in single, duct or multipart configurations for use in interior or exterior areas up to 6.5 tonne pneumatic tyre wheel load. Fire rated to BS 476 – Part 22, all covers are made to your exact specification with no time or cost constraint.

FEATURES / BENEFITS

Made to your specification between stated maximum and minimum sizes, with no time or cost constraint.

Quick and easy to install ensuring minimum disruption.

Provides easy access to underfloor services using lifting keys.

Any configuration of ducts and branches can be created to provide a tailor-made floor access solution.

Fire rated to BS 476 – Part 22 for stainless steel covers. Fire rated for 2 hours on integrity, and up to 2 hours on insulation depending on the floor access cover fill specification.

Double sealed option provides the highest levels of hygiene and security.

TYPICAL FLOOR FINISHES

All types of hard floor finish – ceramic tiles, marble, terrazzo, concrete, resin, wood or parquet floors.

PERFORMANCE

Heavy-duty, suitable for up to  6.5 tonne pneumatic tyre wheel load.

If heavier loading required, please contact the office on 01920 463230.

FIRE RATING

The 1050 Series is tested and fire rated to BS 476 – Part 22 for 2 hours on integrity in the case of a fire. This specification is for the use of the cover in a dead load environment only. If any permanent loads are applied this will invalidate the fire rating.

SINGLE: maximum size 1030 mm x 1030 mm, clear opening 900 mm x 900 mm

DUCT: maximum width 1020 mm, clear opening 900 mm with an unlimited duct run length

• With full C40 concrete infill: fire rated for 2 hours on integrity and 2 hours for insulation
• With stone, tile or other non-combustible surface finish: fire rated for 2 hours on integrity only

MULTIPART: maximum size 4m x 3m overall

• With full C40 concrete infill: fire rated for 2 hours on integrity and 1 hour for insulation
• With stone, tile or other non-combustible surface finish: fire rated for 2 hours on integrity only

*any floor access covers outside of the maximum sizes shown above will not be covered by our fire ratings*

SUITABILITY

The 1050 Series Floor Access Cover is the first choice for demanding external and internal environments subject to heavy pedestrian or vehicular traffic where the emphasis on creating an attractive public realm is at the heart of the development and easy access is required to concealed underfloor services.

External and internal areas that require a Floor Access Cover with a deeper capacity to accommodate a thicker floor covering, such as granite.

The use of support beams and cross members enables complex designs to be manufactured to accommodate situations where a non-standard access solution is required.

MANUFACTURED TO REQUIREMENT

We manufacture Floor Access Covers, Edge Trims and Corner Guards quickly and easily to your exact size/configuration.

PERFORMANCE STANDARDS | 1050 SERIES